Parts

White Industries Cog

This post was posted in Parts and was tagged with White Industries
Croce d' Aune

Campagnolo Croce d' Aune Front Derailleur C023 Braze On Campy Road Bike

Campagnolo Croce d' Aune front derailleur in good condition although it does have the strangest crack on the face of the front cage. The crack won't affect functionality but it is there (see photos). Otherwise, this derailleur has no pitting or rust and shows little wear on the inside of the cage where the chain hits it.

Clamp: Braze on tab
Chainrings: Double
Weight: 105 grams
Pull: Bottom pull with no cable stop.
Markings: Campagnolo shield on front, "Made In Italy" on back.

This post was posted in Parts and was tagged with Campagnolo
Orient Bicycle Cranks

I stumbled on this crankset from 1897 while looking at vintage stuff on eBay. This is what the owner said about it:

This is a complete antique crankset from an Orient Bicycle. The Orient Bicycle is the deepest rooted success of The Waltham Manufacturing Co. Founded by Charles Metz in 1893, a company who pioneered motorized transportation at the turn of the 20th century. By attatching a motor to one of his tandem bicycles in 1898, he created what has been referred to as the first American motorcycle. He went on to produce some of the finest bicycles, earliest production motorcycles and 4 wheeled motorized vehicles through the early 1900s. For more on Charles Metz and The Waltham Manufacturing Co and the impact they had on the history of American transportation see the museum website: http://www.walthammuseum.com/metzco.htm

This particular piece is a set of cranks from an Orient bicycle. If you are restoring an Orient you know this distinctive chainring pattern is a must have. It is in nearly perfect functioning condition and properly patina's cosmetic condition. All parts shown are included, it is a complete set ready to install and ride or re-nickel and show! Not bent, stripped, seized or damaged.

43.5 mm outer diameter on the bearing cups
168 mm crankarm lenth
18 tooth 1" pitch sprocket
1/2" pedal threads

This post was posted in Parts and was tagged with Waltham Manufacturing Co.
Hed Disc Wheel

HED 700c Disc Rear Wheel Clincher Freewheel w/ Mavic Skewer + Continental Sport Tire

This is a 700c HED disc rear wheel that is in good condition. There are no tears or holes in the disc. It does have scratches and scrapes from use (see photo of the worst one). The freewheel threads are in great shape and a Mavic skewer and original HED spacers are included. The bearings spin smoothly. This is a clincher rim, not tubular so you can run any regular 700c tire. A Continental Sport 25c tire in decent condition is included.

This wheel can be converted to a track wheel with the right adaptor (not included).

more info and photos

This post was posted in Parts and was tagged with HED
This post was posted in Parts